GUTFELS CLEAN 3010, Instruction Manual

Page: 30 / 80

EN
Page | 30
16 Troubleshooting
Fault Possible cause Remedy
The vacuum cleaner
does not work.
The appliance is not switched
on
Switch on the appliance.
The electrical plug is faulty
Contact a qualified
technician.
The appliance is not plugged
into the plug socket Plug the appliance into the
plug socket.
If the vacuum cleaner
has no suction power.
An accessory: Hose or pipe,
nozzles or brushes are blocked Remove what is causing the
blockage.
The HEPA filter is soaked/dirty Clean the filter.
If the vacuum cleaner
does not work as it
should or if there are
noises and/or whistling
sounds.
An accessory: Hose or pipe,
nozzles or brushes are blocked Remove what is causing the
blockage.
The dust container is full
Empty and clean the dust
container.
The cover of the container is
not positioned correctly
Close the cover properly.
The dust container is not
positioned correctly Position the dust container
correctly.
The manual air flow regulator
is open Close the manual air flow
regulator.
If the cable does not
wind up completely.
The cable winds up slowly
Unwind the cable and press
the button again. If in
doubt, consult a qualified
expert.