GUTFELS CLEAN 3010, Instruction Manual

Page: 25 / 80

EN
Page | 25
Hazards for children and persons with
reduced physical, sensory, or mental
abilities (e.g., partially disabled, elderly
persons with reduced physical and
mental abilities) or lack of experience
and knowledge (e.g. older children).
Risk of injury! Improper use of the
vacuum cleaner can lead to injuries.
• Do not vacuum people or animals.
• When vacuuming with a suction
nozzle, do not come close to the
head or hair.
• Risk of crushing: The vacuum
cleaner contains moving parts.
Take care of fingers and hands
during assembly, daily use and
cleaning.
NOTE!
RISK OF DAMAGE!
Improper use of the vacuum cleaner can
result in damage to the appliance.
• Place the vacuum cleaner on an
easily accessible, level, dry, heat-
resistant and sufficiently stable
work surface. Do not place the
vacuum cleaner at the side or on
the edge of a work surface.
• Do not allow the mains power
cable to come into contact with
hot parts.
• Do not expose the vacuum cleaner
to high temperature (heating,
etc.) or weather conditions (rain,
etc.).
• Do not use the vacuum cleaner if
the plastic parts of the vacuum
cleaner are cracked or deformed.
• Do not use the vacuum cleaner
without a HEPA filter.
• Do not vacuum burning or glowing
objects such as cigarettes or
apparently extinguished ashes.
• Do not vacuum liquids or damp
dirt. Allow wet cleaned or
shampooed carpets to dry before
vacuuming.
• Do not vacuum up toner dust from
printers or copiers. The filter
system cannot completely filter
out the toner dust. The toner dust
could get back into the chamber
via the fan.
• Do not absorb highly flammable or
explosive substances or gases.
• Do not vacuum sharp-edged,
heavy or hard objects. The
vacuum cleaner could get blocked.
Assembling the vacuum
cleaner
NOTE!
Depending on what you want to vacuum,
there are 2 attachments to choose from:
- For a dusty carpet or hard floor, use
the floor nozzle (10). The foot button can
be used to lower or raise the integrated
bristle ring for carpets.
• For corners that are difficult to
reach, we recommend the crevice
nozzle (12).
WARNING!
CAUTION!