ZONESCAN INSTALL User Manual page
–
13
The next step is to deploy the NB-IoT logger on the map. This can be done via GPS position or
manually by moving the position on the map.
4.1.6
Finalize the changes
Once the logger is deployed you will see a tutorial:
‘Tap on the next screen after deploying’. Select
this button to upload to ZSNet.
In the dialog, which is now shown on the screen, select
‘Upload’ to upload the data to ZSNet. If ‘Later’
is selected,
the data should be uploaded within the ‘Network contact time’ set in the Gateway settings
to avoid data loss.
4.2
NB-IoT Maintenance
This section is divided into three sub-sections:
Read Device Config, State, and Log
To read each of the parameters select NBIoT maintenance in the navigation drawer item. Then, connect
the OTG cable to the mobile device.
