Introduction
A supplied breakout box connects to the sensor allowing separate connection to a
power supply, recording system and hand-held control unit.
As an option the 3ESP can be supplied with other output connector types,
e.g.
standard 26-pin D sockets, to your own pin-out specification.
2.1.3 Sensor response
The 3ESP can be supplied with a response which is flat to velocity from 100 Hz to
any of 0.1 Hz (10 s), 0.033 Hz (30 s), 0.016 Hz (60 s), 0.01 Hz (100 s) or 0.0083 Hz (120 s).
Alternatively, a
hybrid
response function may be provided. See Section 6.1, page 30,
for more details.
If you do not require high-frequency data, a low-pass filter may be installed at a
frequency (below 100 Hz) that you specify.
5
Issue G - February 2016
