Setup menu
G&D MultiPower-12 ·
8
English
Configuration settings
Delay until the first »Power Out« socket is active
After you turn on the central power supply, the first
Power Out
becomes active after a
delay of 0.7 seconds (
Power Start Delay
).
You can decrease or increase the delay by entering values between 0.0 and 10.0 sec-
onds (standard: 0.7 seconds).
How to adjust the delay until the first »Power Out« socket is active:
1. Start the terminal emulator.
2. Load the connection settings of the setup menu and establish the connection.
3. Press
R
within the terminal emulator.
4. Use the
Arrow
or
Arrow
keys to select
Power Start Delay
.
5. Use the
Arrow
or
Arrow
keys to decrease or increase the adjusted value.
6. Press
S
to save your settings.
Delay until further »Power Out« sockets are active
Following the first
Power Out
socket,all other sockets become
successively
active with a
delay of 0.1 seconds.
You can decrease or increase the delay by entering values between 0.0 and 2.0 sec-
onds (standard: 0.1 seconds).
How to adjust the delay until further sockets are enabled:
1. Start the terminal emulator.
2. Load the connection settings of the setup menu and establish the connection.
3. Press
R
within the terminal emulator.
4. Use the
Arrow
or
Arrow
keys to select
Power Channel Delay
.
5. Use the
Arrow
or
Arrow
keys to decrease or increase the adjusted value.
6. Press
S
to save your settings.