Installation
3
· G&D MultiPower-12
Installation
1. Use a power loop cable to connect one of the
compatible devices (12VDC/600mA) to one of
the twelve
Power Out
sockets.
2. Connect one of the supplied power cables to the
Main Power
socket.
Connect the power cable to a power outlet.
3. If necessary, connect one of the supplied power
cables to the
Red. Power
socket to establish a
redundant power supply.
Connect the power cable to a power outlet of another power circuit.
Startup
1. Turn on the power switch of the internal
Main Power
power pack.
2. Turn on the power switch of the internal
Red. Power
power pack.
NOTE:
The
MultiPower-12
supplies up to twelve devices with 12 Volt.
The maximum power consumption permitted per device is 600 mA.
NOTE:
After you turn on the central power supply, the outputs are turned on suc-
cessively.
Power Out 2
Power Out 3
Power Out 1
Power Status