Initiation
9
· G&D DL-Compact
Initiation
After the KVM extender has been properly installed, it can be immediately put into
operation.
Mind the following activation sequence while initiating the KVM extender:
1. Connect the power pack of the receiver (
DL-Compact-CON
) to the mains. Use a
power cable (
PowerCable-2 Standard
) for this purpose.
2. Connect the power pack of the transmitter (
DL-Compact-CPU
) to the mains. Use a
power cable (
PowerCable-2 Standard
) for this purpose.
3. Switch on the computer that is connected to the receiver.
After the KVM extender has been switched on, the LEDs on the front panel of the
computer module and the user module indicate the system’s operating status.
on page 19 provides further information on this topic.
Operation
The computer that is connected to the transmitter (
DL-Compact-CPU
) is operated at
the console of the receiver (
DL-Compact-CON
).
NOTE:
The recommended activation sequence for the initiation ensures that the KVM
extender is able to read out the features of the connected monitor and to transmit
them to the computer (see
Summary of Contents for DL-Compact
Page 46: ...NOTES...
Page 47: ...NOTES...
