Expanding switchable signals
22
· G&D ControlCenter-Digital-288
Creating a new channel group
How to create a new channel group:
1. In the menu, click on
Matrix systems > [Name] > User modules
or
Target modules
.
2. Click on a console or a target module that is not assigned to a
channel group
.
3. Click on
Channel grouping
.
The selected module is assigned to the first KVM channel and is shown in the
Device group
column. The right column (
Unassigned
) lists the matrix switch mod-
ules you can add to the new channel group.
4. In the right column (
Unassigned
), click on the module you want to add. In the left
column (
Device group
), click on the channel you want to add the module to.
5. Click on (
arrow left
) to assign the module to the chosen channel.
6. Repeat steps 4 and 5 to add another module to the
channel group
.
7. Click on
Save
.
NOTE:
You can assign up to seven additional video channels, one USB or
RS232 channel and four multi channels to a console’s KVM channel.
You can assign up to seven additional video channels to the KVM channel of the
computer, too. In addition, you can create
pools
of four devices for the USB 2.0/
RS 232 channel and for each of the four multi-channels.
NOTE:
All channels of a channel group are switched at the same time.
NOTE:
To change the order of already added channels, mark a channel and
click on (
arrow down
) or (
arrow up
). The chosen channel is moved up or
down.