1. HANGING SYSTEM INSTALLATION
OFF OFF OFF
Turn off power at breaker
box to avoid possible
electrical shock.
Use metal outlet box suitable
for fan support.
Outlet box must support 35 lbs min.
Note 1:
Note 2:
WARNING: BLADES SHOULD BE AT LEAST 7 FEET FROM FLOOR
Installing mounting bracket to ceiling outlet box
1-1. Outlet Box
Mounting Bracket
Spring
Washer
Flat Washer
1-1. Install mounting bracket to outlet box on ceiling by using screws included with the outlet box and
washers from the hardware bag.
2. BLADE INSTALLATION
*2-3. Use Styrofoam as cushion for this step.
*Place the fan assembly on Styrofoam with switch cap up.
*Note: Make sure all blade washers & screws are tightened to avoid operating noise.
Styrofoam
Blade Screw (3)
Blade
Holder
Rubber Washer (3)
Blade(5)
Blade(5)
Motor screw (2)
Fan Assembly
2-4.Secure Blade Assembly to the motor with 2 motor
screws provided from hardware bag.
NOTE:
To prevent wobble, do not bend blade or
blade holder.
P3
2-2. Attach blade to blade holder with 3 blade screws
and 3 rubber washers provided from hardware bag.
Make sure all screws are firmly tightened.
(* Repeat until all 5 blades are installed firmly.)
2-1.Remove 3 screws from switch housing cover
and keep them for Step 5 in Page 5 .
Fan Assembly
Switch Cover
Screws(3)
Switch Housing
Cover