10-4. TO
SET
UP REMOTE
FOR
#2 FAN
Disconnecting wire from #1 Fan
Disconnect the Black wires from #1 Fans and connect the Black wires back to #2 Fan that you remove from
10-3.
Make sure to turn off power at breaker box.
OF
F
OF
FO
FF
OFF
#2 Fan
is ready for setting
Turn on power at breaker box and #2 Fan is ready for setting.
OFF
OFF
OFF
ON
*See the remote control setting process for
10-1 to set up #2 Fan.
10
-
6.
Switch on the main power and now each of these two fans are operated by its own
remote individually.
OFF
OFF
OFF
ON
10-5. RECONNECT ALL FANS
After all the fans have done the resetting process, reconnect all the wires for #1 fan & #2 fan,
and lift up the Canopy of #1 fan & #2 fan.
(operating now)
(operating now)
NOTE:
For more than two fans, the same rules apply. Make sure only one fan at a time is
connected to power when doing the Remote Setting. Already completed fans should be
disconnected until all fans have completed the Remote Setting process.
P10
Make sure to turn off power at breaker box.
OF
F
OF
FO
FF
OFF
Outlet Box
Mounting Bracket
#2 Fan
Outlet Box
#1 Fan
(Disconnecting)
Canopy
Mounting Bracket
#2 Fan
#1 Fan
Outlet Box
Mounting Bracket
#2 Fan
#2 Fan
Outlet Box
Mounting Bracket
#2 Fan
Outlet Box
#1 Fan
Outlet Box
#2 Fan