Guldmann 12075-000, Manual

Page: 7 / 16

7
�
�
�
�
�
1 .08 . Assembling .before .use .
Place the DH 000 lifting unit in
the rail prior to mounting the lifting
hanger. The Guldmann lifting hanger
model 1170 or 1190 is mounted
on the lifting strap as shown on the
drawings below.
For use with DH 000, the standard
liftinghanger is model 1170.
Loosen the pointed screws (4) with
the 1.5 mm Allen key to pull out the
axle journal (3) and the cylinder
sleeve (1). Insert the cylinder sleeve
in the lifting strap () and mount the
lifting hanger(5).
For use with DH 000 with the oval
hook, the lifting hanger is model
1190.
Loosen the screw, remove the pipe and mount the lifting hanger.
Reposition the pipe and tighten the screw.
The pipe is mounted as shown below
Please .make .sure .that .the .screw .is .correctly .
fixed and fastened after the installation.
Bath chair, bath stretcher, or horizontal lifting support are mounted direct on
to the oval hook of the lifting strap, by means of a snap hook with a swiveling
safety. The hand control is connected to the plug on the bottom of the lifting
module, as shown on the sketch.
DH 000 is now ready for use in the Guldmann rail systems.
©
G
ul
dm
an
n
G
B
-8
96
/0
8/
08
•
#
9
00
66
©
G
ul
dm
an
n
G
B
-8
96
/0
8/
08
•
#
9
00
66