14
5 .03 .
Service .check .- .Allround
During the inspection a service report shall be made, describing what has
been checked and exchanged.
Worn or defective parts shall be replaced by new spareparts from
V. Guldmann A/S.
1 . Visual .check .of .the .product .
• Check the product for wear and tear
• Check the product for any deformity
• Check that the product does not show any other dificiencies.
2 . Test .of .the .product, .as .during .normal .use .
• Check all functions on the product, with and without load,
• ( eg. Up, down, forward, backward, out and in ).
• Check the emergency lowering is operational.
• Check the emergency stop is operational.
• Check the charging indicator is operational.
3 . Dismantle .the .cover ./ .fence . .
4 . Check .the .electrical .condition .of .the .products
• Check the batteries and measure the:
• Input / Voltage
• Output / Voltage
• Check electrical functions and signals
• Check all wirings for errors and defects
• Check wire lead-ins
• Check all possible conections, plugs etc.
5 . Check .the .mechanical .condition .oft .the .product
• Clean the product for dirt and other impurities
• Inspect and evaluate the vital parts of the product
• Exchange defective and worn
• Grease the product
6 . Mount .the .cover ./ .fence
7 . Point .1 .2 .is .carried .out .one .more .time .as .a .control .function
8 . Have .new .errors .or .problems .arisen .in .point .7?
• If new problems have arisen, go back to point 3
• If no problems have arisen, finish the inspection.
9 When a service inspection including service work or exchange of com-
ponents has taken place, the final check should comprise a weight test
with .the .product’s .nominal .load .
If the DH 000 has been silicone-coated for use in wet environment, this coa-
ting must be renewed if it shows sign of drying.
©
G
ul
dm
an
n
G
B
-8
96
/0
8/
08
•
#
9
00
66
©
G
ul
dm
an
n
G
B
-8
96
/0
8/
08
•
#
9
00
66
Summary of Contents for 12075-000
Page 1: ...GB DH 2000 Vers 1 00 ...
