Tuner alignment
If you plan on aligning the tuners to the headstock using a square, I’d recommend doing this
as you install each individual tuner as there will be insufficient room to fit a square between
the tuners in most cases.
You can also align tuners relative to one another using a steel ruler across your tuners once
in place. Or install the first and last tuner, and using a steel ruler mark a straight line
between them on masking tape to mark out the location of the pilot holes.
Installing the Bridge
When installing the Tune-O-matic style bridge you will need to first insert the ground wire
against the bridge post bushing which allows us to ground the electronics.
16
