Guilin Woodpecker Medical Instrument CURING LIGHT LED.C, User Manual

Page: 5 / 24

3
Picture 1
6. Operation
6.1 Let the cathode of the battery face down to the battery
compartment, and tighten it to the main unit (See Picture 1).
6.2 Take off the red cap from the optical fiber and then insert
the metal part into the front of LED.C, make sure to screw the
fiber to the end.
6.3 To install the light hood on as show in picture 1.
6.4 Press the time button to choose the solidification time.4
working time modes are available: 5, 10, 15, 20 seconds.
6.5 Lightly press the mode key. Following three modes are
available.
6.5.1 Full power mode: blue light shine in full power.
6.5.2 Ramping mode: The power of the blue light turns from
weak to stronger, and reaches the highest power in 5 seconds.
6.5.3 Pulse mode: blue light work in the mode of pulse.