manualshive.com logo in svg

Guilin Woodpecker Medical Instrument CURING LIGHT LED.C, User Manual

Share
Download
Guilin Woodpecker Medical Instrument CURING LIGHT LED.C User Manual Download Page 19

17

 

 Atmospheric pressure for storage

   

        Appliance compliance WEEE directive

  

       Follow Instructions for Use

   Authorised Representative in the EUROPEAN 

COMMUNITY

18. Statement 

All rights of modifying the product are reserved to the 

manufacturer without further notice. The pictures are only for 

reference. The final interpretation rights belong to GUILIN 

WOODPECKER MEDICAL INSTRUMENT CO., LTD. The 

industrial design, inner structure, etc, have claimed for several 

patents by WOODPECKER, any copy or fake product must take 

legal responsibilities.

19. EMC - Declaration of conformity 

The device has been tested and homologated in accordance 

with EN 60601-1-2 for EMC. This does not guarantee in any 

way that this device will not be effected by electromagnetic 

interference Avoid using the device in high electromagnetic 

environment.

Summary of Contents for CURING LIGHT LED.C

























Reviews:

No comments

Brands by name

Popular brands

Load more brands