Vertical Shooting
Press and hold the trigger button in the horizontal shooting mode and then single click the
function button to switch to the vertical shooting mode.
Double click the trigger button to exit the vertical shooting and restore to the horizontal shooting
mode.
13
www.feiyu-tech.com
Single click
Press & Hold
It is effective only when it is set right from
the pitch axis ,please see the graph
Hold the stabilizer in horizontal
Vertical Shooting
Reset
Double clicks
Audio recording with Bluetooth connection
Turn on the mobile phone Bluetooth and
connect to FY_SPG2AUDID_XX. After the
connection is successful, press the shutter
button on the handle. If the volume appears
on the phone interface (as shown in below
picture), the connection is successful.
Turn the gimbal on and plug the
earphone connector into the audio
jack on the right side of the SPG2
handle.
Plug in the earphone
connector (American
standard)
Note:
The audio jack at the SPG2 handle is suitable for American standard earphones. To use the Chinese standard earphones,
you need to use the conversion cable (self-prepared).
1
2
1
1
