Guilin Feiyu Electronic Technology Co.,Ltd
Guilin Feiyu Electronic Technology Co.,Ltd http://www.feiyudz.cn Tel:0773-5815749
27
Flight Parameter Setting:
1
.
Target Speed: Set the expectations value of the current speed, unit: km / h.
2
.
Target Height: Set the expectations value of the current altitude, unit: m.
3
.
Target Distance: Set the expectations value of the current distance, unit: m.
4
.
Circle Radius: Set the circling radius, unit: m.
5
.
Photographic Interval: Set the space distance between every automatic photography. Unit: m.
Parameter Setting 1 and Parameter Setting 2
1. Setting:
Set up the parameter of each flight control gain.
2. Mixed-Control Mode:
Set up the mixed control mode of the autopilot, for adapt to different
rudder surface layout aircraft.
3. Reverse Rudder Setting:
Set up the pros and cons direction of rudder movement.
4
.
Permanently preserve the setting parameters:
Preserve the setting parameters to FY-3ZT
permanently.
9
.
Software Operation Process
z
The Basic Operation Sequence
1
.
Please connect the computer serial port with the data radio correctly, keep the equipment
connecting in normal working condition.
2. Please install the software correctly, if the map does not work properly, please install the
MapInfo Map control.
3. Run this software.
4.Through the menu bar of the "map"-"open the map", choose a MapInfo Map Geoset atlas file
whose suffix name is(.gst) from the computer, and then click "Open" to load it to the main map
interface.
5
.
Through the menu bar of the "communication" - "port" and "baud rate", set it to the actually use
port which connect the computer and the data radio. Make sure the baud rate is same with the
port baud rate of the data radio. The baud rate of FY-3ZT is 19200.
