Guilin Feiyu Electronic Technology Co.,Ltd
Guilin Feiyu Electronic Technology Co.,Ltd http://www.feiyudz.cn Tel:0773-5815749
18
Ⅵ
.Flight Parameters Setting
Target Speed:
Set to the aircraft cruise speed
Target Altitude:
Change the current aircraft’s target altitude in real time.
Circle Radius:
Set all the aircraft circle radius.
Photography Interval: Set the distance interval of automatic photography.
Cruise Throttle:
Set the throttle control neutral value of the autopilot when the plane is in
automatic navigation fighting. This value can be manual scrap in flight.
If your plane belongs to vibration ones, you have to check the stability of the engine, just
make sure the engine will not be off, once you control the throttle rudder by the remote
quickly. Cruise throttle must be set up.
.
Ⅶ
The Setting of the Route
After the autopilot positioned, a little red plane will show at the location, means the current
location .you’d better set the current location as the return point during debugging .And then set
300-600 easy route around the flying area, such as square route, set the proper height, such as
200meters .It’s better to keep the flight all in the monitor of sighting line during the whole flight .
After setting the route, upload the route, and then click “permanently preserve the route”
preserve .or once the autopilot powers off, the route will be lost.
Ⅷ
.
The Debugging of after Take Off
1. First
in the manual mode the plane can fly straight without the remote controller.Also can
take off in auto control mode (please checking the auto control servo carefully, for more detail,
please check “Servo Direction Setting and Debugging”, under the circumstance of confidence of
