Guild PSC185GH Instruction Manual Download Page 18

Customer Helpline

 0333 3201989

18

Technical Data

Environmental Protection

Guarantee

Waste electrical products must not be disposed of with household waste. Please 
recycle where facilities exist. Check with your local authorities or retailer for 
recycling advice.

Vibration Information

times when the tool is switched off and when it is running idle but not actually doing the 
job. This may significantly reduce the exposure level over the total working period.
Helping to minimize your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades.
Maintain this tool in accordance with these instructions and keep well lubricated (where 
appropriate).
If the tool is to be used regularly then invest in anti vibration accessories.
Avoid using tools in temperatures of 10

0

C or less.

Plan your work schedule to spread any high vibration tool use across a number of days.

This product is selected for DOMESTIC USE ONLY and not for business use.
This product is guaranteed against manufacturing defects for a period of 24 months. This 
does not cover the product where the fault is due to misuse, abuse, use in contravention of 
the instructions, or where the product has been the subject of unauthorised modifications 
or alterations, or has been the subject of commercial use. In the event of a problem with 
the product within the guarantee period please return it to your nearest store. If the item is 
shown to have an inherent defect present at the time of sale, the store will provide you with 
a replacement. Your statutory rights remain unaffected.

Issue1 08/2015

Summary of Contents for PSC185GH





















Reviews: