Customer Helpline
0333 3201989
14
Operating Instructions
7� USING THE LASER GUIDE (SEE FIG G1, G2, G3, G4, G5, G6)
WARNING:
Never stare directly into the laser beam and never point the beam at
anybody. The laser beam energy is extremely harmful to your eyes.
1) The laser guide is for the purpose of precision cutting. Make sure the batteries are
fitted in the laser guide before carrying out precision cutting. To fit the batteries, remove
the battery storage cover as shown, insert the 2 batteries (supplied), then replace cover.
(SEE FIG G1, G2, G3, G4)
NOTE:
Ensure correct battery polarity.
2) Depress the laser on/off switch button, the laser guide then projects a visible red line
on the workpiece surface; make your cut along the red line. (SEE FIG G5, G6)
NOTE:
The sawdust may block the laser beam, clean the laser generator periodically.
Switch off the laser when you stop the tool. The laser does turn not off automatically.
Switch off the laser when tool stops.
Take out batteries if you do not need to use the laser for a long time.
Never stare directly into the laser beam and never point the beam at anybody.
G1
G2
G3
G4
Summary of Contents for PSC185GH
Page 20: ......
