Customer Helpline
0333 3201989
11
Operating Instructions
NOTE:
Before using the tool, read the instruction book carefully.
Intended use:
This tool is intended for lengthways and crossways cutting of wood with straight cutting
lines as well as bevel angles to 45° while resting firmly on the work piece.
1� FITTING/CHANGING A SAW BLADE (SEE FIG A1, A2, A3)
Press the spindle lock button and use the allen key to loosen and remove the blade bolt
(12). Remove the outer flange (11). Rotate the lower blade guard clockwise by pushing the
guard lever to take out the old blade (13). Fit a replaced blade. Ensure that the blade bore
is located on the inner flange (a) and the blade direction arrow points in the same direction
as the fixed guard arrow. Place the outer flange, the blade bolt onto the blade bore. Press
the spindle lock again and use the allen key to tighten the bolt with 1/4 turn more than
finger tight. Check if the blade is securely clamped.
WARNING: Blade teeth are very sharp�
For best cutting results ensure you use a
saw blade suited to the material and cut quality you need.
13
11
12
a
A1
A2
A3
Summary of Contents for PSC185GH
Page 20: ......
