
6
General safety precautions
The following list of precautions serves to reduce risk of injury or damage of
described instrument. To prevent injuries use instrument accordingly with
rules in this manual.
Installation and service need to be performed by qualified
persons only.
Use
a suitable power supply. Use power supplies only with a voltage
recommended by the manufacturer (+5V DC) and approved in
accordance with proper standards. Pay attention, the source has
undamaged cables or cover.
The device
and power supply must not be used in a humid and
hazardous environment (such as bathrooms), at locations exposed to
direct sunlight and to other heat sources, thus preventing damages
and deformation of the cover.
Do not use the instrument without its covers.
Do not remove the
covers from the device.
Do not use
the instrument if it does not work correctly.
If you think,
that the device is not working correctly, let check it by qualified
service person.
Never
charge batteries that are not rechargeable.
Do not use
the device in explosive environment.
Summary of Contents for AR004926
