GUILCOR AR004926, Instruction Manual, Page: 53 / 75

53

Verification of cabling - check the connection quality of cables,
check visually entire cable length for damage and the route of
cables for interference, especially whether some parallel power
wires are not near.

Visual inspection of sensors - perform their visual inspection and
make sure no water has leaked inside the sensors; moreover,
verify that their locations are suitable from the perspective of
measuring accuracy as well as possible interference.

Make a verification protocol.
Service recommendations _________________________
Technical support and service are performed by the devices
’
distributor. Its contact is given in the warranty certificate, supplied with
the Multilogger.
ATTENTION - damage due unauthorized manipulation
will cause the warranty to expire!
Placing out of operation after the end of the device life ___
Disconnect the power, remove batteries and return data logger to the
supplier or specialized company as electric waste.