GUILCOR AR004926, Instruction Manual, Page: 17 / 75

17
Two voltage ranges are available on each
universal thermocouple connector for measuring
small voltages:

range -60 mV to +140 mV

range -18 mV to +18 mV
Use the white uncompensated connector
connected according to the picture.
Terminals ______________________________________
Inputs (0 to 20) mA, (0 to 10) V, binary inputs and the counter are
equipped with a two-part, self-locking WAGO terminal block.
Insert
flat-bladed screwdriver to
rectangle terminal hole and push
screwdriver towards away from
you - contact is released. Insert
wire to released terminal (circular
hole behind the rectangular one)
and close the terminal by
removing the screwdriver.
The terminal block can be removed from the device without the need to
disconnect individual wires!
Connection of the binary and counter input: