User Manual
•
Rectangular areas can be set to display the Maximum, Mean or Minimum
temperature. Press Button “M” to bring up the main menu, press Button “V“ to
highlight the Setup option, and then select “Analysis” by pressing Button “M” or
“OK”
•
Under the heading named “Area”, you can toggle between “Min”, “Mean” and
“Max” by pressing Button “
＜
”and “
＞
”, confirm by pressing Button “M” or Button
“OK”.
•
It is possible to toggle between one and four areas. Under the heading named
“Mul Spot/Area”, you can toggle between “on” and “off” by pressing Button “
＜
”and
“
＞
”, select by pressing Button “M”. Only one area is present in the “off” position.
•
Press “C” to exit and return to the frozen/ saved image
Note:
•
Pressing Button
●
can switch between the two modes: changing area
location and adjusting area size. Under each mode, pressing Button
●
will
switch to the other.
•
The original size of rectangle areas is the smallest size for all the time.
Sub Menu Isotherm
•
Isotherm can be performed on live, frozen and saved images.
•
Press Button “Menu” or “
＞
” to enter the option “Analysis”. Press Button “ ” to
∨
highlight “Isotherm”, select by pressing Button “Menu” or Button “OK”
•
Press Button “ ”
∧
and “
∨
”to set the maximum temperature of the isotherm band,
Press Button “
＜
”and “
＞
” to set the minimum temperature of the isotherm band.
