9 of 15
Step 20
：
Attach the door crossbar(TS305.15) to the door upright rail (TS305.16) by using one 1/4"-20×2" bolt
(48153B), one nylon washer blk 5/16" and one 1/4" lock nut (48752B). Leave these hand tight for now
.
(
Figure
21)
Step 21
：
Attach the door crossbar (TS305.15) to the door upright left rail(TS305.22) by using
one spring lock pin
(63282)
. (
Figure 22)
Figure 21
Figure 22
Step 22
：
Attach the two ladder feet (TS305.01) to the ladder section (TS305.02) by using two two spring lock
pins (63281). (Figure 23)
Figure 23
Step 23
：
You may now tighten all nut & bolt assemblies. Be sure not to over tighten as this could cause the
tubing to be crushed or damaged!
NOTE:
Please recheck all nuts/bolts/pins to ensure all are tightened and installed correctly.
Summary of Contents for 718070
Page 3: ...3 of 15 ...
