4
TROUBLESHOOTING
Problem
Possible Cause
Corrective Action
Cab frame wobbles.
All the frame tubes are not inserted tightly.
Check all tube joints to make sure all are tight.
Cab frame is loose.
Web straps on bottom of cab skin are loose.
Tighten web straps on bottom of cab skin.
Cab is too low for proper use.
Mounting bar mounted too low on snow thrower. Raise mounting bar higher on your snow thrower.
Cab skin is overly loose.
Cab skin is not tightened correctly or enough.
Check all fastening points and retighten.
Cab does not stay level.
Locknuts on U-bolts are not tight enough.
Tighten locknuts on U-bolts.
Cab interferes with machine controls. Mounting bar or frame mounted incorrectly.
Refer to step 5 and readjust your cab.
CARE AND MAINTENANCE
• Periodically check all bolts to see that they are tight. If one or more bolts
come loose, failure of cab parts may occur.
• Don’t clean the plastic windows when they are dry—you can scratch them.
The best way to clean your windows is to hose them with water and rub them
with a soft cloth. Liquid soap may be used.
• Fabric areas of the cab may be washed with a wet rag. Don’t use soap as it
may remove protective coatings added by the factory.
• Store in a clean dry place. Never store a wet cover in an enclosed area as it can
become mildewed.
• ALWAYS remove the cover before transporting your snow thrower on a truck
or trailer. Use during transportation can damage your cab.
Printed in China
For assistance with this product, please call The Sportsman’s Guide Customer Service toll free at:
800
-
888
-
5222
,
7
AM -
7
PM CST, Monday - Friday or email us at: [email protected]
