24
Lesson 6b: Rewind and Fast-Forward. (Navigate in a file).
Steps:
1.
Enter Pause Mode from any point in
a file.
2.
Determine approximately how many
lines to Rewind.
3.
Press and HOLD DOWN the Start
Key.
4.
Release the Start Key.
5.
Resume Reading from the new
location.
How: See Lesson 2a – Steps 4 thru 6.
How: For Example – If you only desire to re-read a few
words that you missed or did not understand, then
one line would likely be sufficient. However, if you
desire to re-read an entire paragraph, then several
lines would be needed (perhaps 4 or 5).
How: The Start Key can be found on the keypad at the
Bottom/Left corner (if the keypad cord is pointing
away from you). The Start Key has a raised full
circle on it that you can feel. Press it completely
down and HOLD. In approximately 5 seconds you
will begin to hear bells. Each bell that you hear
represents rewinding 1 line. So, listening for 5 bells
to chime would equate to rewinding 5 lines on the
page.
How: Once you have heard the same number of bell
chimes equal to the number of lines you wanted to
rewind, simple release the Start Key.
How: Pressing the Pause Key and quickly releasing the
key will resume the reading of the document at the
new point on the document that you have navigated
to. The Pause Key can be found on the keypad at
the Bottom/Right corner (if the keypad cord is
pointing away from you). The Pause key has a
raised pair of vertical lines on it that you can feel.
