Gude Expert Power Control 1000, Manual

Page: 9 / 20

9
Expert Power Control 1000 / 1001 Configuration
4.3.3 Configuration - IP ACL
IP Access Control List (IP ACL) acts as an IP filter for your Expert Power Control 1000 / 1001. Wether it is active hosts and
subnets only can contact Expert Power Control 1000 / 1001, if their IP adresses are stated in this IP ACL.
e.g.: „http://192.168.0.1“ or „http://192.168.0.1/24“
If you locked yourself out by mistake, please activate the bootloader mode of Expert Power Control 1000 / 1001, start
Gbl_Conf.exe and deactivate IP ACL.
You can find more information about configuration of IP ACL or have a look at http://www.gude.info/wiki.
4.3.3.1 Reply ICMP-Ping requests
Here you can set, if Expert Power Control 1000 / 1001 shell react on pings.
4.3.3.2 Enable IP Filter
Here you can activate the IP Access Control List (IP ACL) of Expert Power Control 1000 / 1001.
If IP ACL is active, DHCP and SNMP only work, if all necessary servers and clients are registered in this list.
4.3.4 Configuration - HTTP