Gude Expert Power Control 1000, Manual

Page: 12 / 20

12
Expert Power Control 1000 / 1001 Configuration
4.3.6 Configuration - SNMP Trap Receiver List
4.3.6.1 Enable Traps
Here you can activate SNMP-traps. if enabled, Expert Power Control 1000 / 1001 will dispatch SNMP-traps to all receivers
listed. Receivers have to be listed as follows: IP address (and, if necessary the HTTP port), e.g.: 192.168.0.2:8000
Use SNMP only if your network is fitted for.
4.3.6.2 Trap Version
Here you can choose between SNMP-traps standard v1 and v2c.
Use SNMP only if your network is fitted for.
More information about the SNMP functions of Expert Power Control 1000 / 1001, you can find in chapter SNMP, on http://
www.gude.info/wiki or ask our support team.
4.3.7 Configuration - Syslog
Syslog messages are simple text messages transmitted to a syslog server using UDP.
Linux OS regularly have a syslog daemon installed, e.g. syslog-ng. For Windows there are some freeware tools available.
On following events, Expert Power Control 1000 / 1001 will send a syslog message:
- Booting up
- Activation/deactivation of syslog
- Switching of Power Ports
You can find more information about configuration of Syslog in chapter Configuration - Syslog or have a look at http://www.
gude.info/wiki.