Gude Expert Power Control 1000, Manual

Page: 11 / 20

11
Expert Power Control 1000 / 1001 Configuration
4.3.5.1.1
SNMP-communities
SNMP authentifies requests by so called communities.
The public community has to be added to SNMP-read-requests and the private community to SNMP write requests. You can
see the SNMP communites like read/write passwords. SNMP v1 and v2 transmit the communities without encryption.
Therefore it is simple to spy out these communities. We recommend to use a DMZ or IP ACL.
4.3.5.1.2
MIB
All information, that can be requested or changed, the so called „Managed Objects“, are descripted in „Management
Information Bases“ (MIBs).
There are three MIBs, which can be requested from Expert Power Control 1000 / 1001:
„system“, „interface“ and „powerports“
„system“ and „interface“ are standardised MIBs (MIB-II).
„powerports“ (GUDEADS-EPC-MIB::gadsEPC) was created especially for Expert Power Control 1000 / 1001.
At least, there are so called Object Identifiers (OID) subordinated to those three structures. An OID describes the location of
an information inside a MIB.
4.3.5.1.3
SNMP-traps
SNMP-Traps are system messages, sent via SNMP-protocol to different clients. On following events, Expert Power Control
1000 / 1001 will dispatch a SNMP-Trap:
Switching of the Power Ports
Min/Max-Alerts from the sensors
You can find more information about configuration of SNMP at http://www.gude.info/wiki.
4.3.5.2 Enable SNMP-get
Here you can activate SNMP-get protocol of Expert Power Control 1000 / 1001.
Use SNMP only if your network is fitted for.
4.3.5.3 Community public
Here you can enter the SNMP public community.
Use SNMP only if your network is fitted for.
4.3.5.4 Enable SNMP-set
Here you can activate SNMP-set protocol of Expert Power Control 1000 / 1001.
Use SNMP only if your network is fitted for.
4.3.5.5 Community private
Here you can enter the SNMP private community.
Use SNMP only if your network is fitted for.
4.3.5.6 Download SNMP MIB
Here you can download the MIBs of Expert Power Control 1000 / 1001.
Use SNMP only if your network is fitted for.