background image

4

Expert PDU basic 8110/8111

Security Advise

1

Security Advise

The device must be installed only by qualified personnel according to the following installation and operating instructions. 
The manufacturer does not accept responsibility in case of improper use of the device and particularly any use of equipment
that may cause personal injury or material damage.
The device contains no user-maintenable parts. All maintenance has to be performed by factorytrained service personnel.
Check if the power cord, the plug and the socket are in proper condition.
The device can be connected only to 230V AC (50 or 60 Hz) sockets.
Always connect the device to properly grounded power sockets.
The device is intended for indoor use only. Do NOT install them in an area where excessive moisture or heat is present.
Because of safety and approval issues it is not allowed to modify the device without our permission.
Please note the safety advises and manuals of connected devices, too.
The device is NOT a toy. It has to be used or stored out or range of children.
Packaging material is NOT a toy. Plastics has to be stored out of range of children. Please recycle the packaging materials.
In case of further questions, about installation, operation or usage of the device, which are not clear after reading the manual,
please do not hesitate to ask our support team.

2

Description

Expert PDU basic 8110/8111 is a 19“ device which allows to monitor the power distribution of up to 8 electrical devices via
TCP/IP. 

For  installation,    Expert  PDU  basic  8110/8111  is  simply  connected  to  a  power  supply  and  to  the  local  network.  After
allocating a free IP address to Expert PDU basic 8110/8111, the device can be monitored from any computer in the same
LAN via web browser.

Expert  PDU  basic  8110/8111  offers  the  possibility  to  use  SNMP  and  Syslog.  Furthermore,  access  to  the  device  can  be
controlled via IP access control list (IP-ACL) and HTTP password.

3

Hardware

3.1

Content of delivery

Included in delivery are:

Expert PDU basic 8110/8111

Short manual

Summary of Contents for Expert PDU basic 8110



















Reviews: