Gude Expert PDU basic 8110, Manual

Page: 12 / 18

12
Expert PDU basic 8110/8111 Configuration
4.3.7.1 Enable Syslog
Here you can activate Syslog of Expert PDU basic 8110/8111.
4.3.7.2 Syslog Server IP
If syslog is active enter here the IP address of you Syslog server.
4.3.7.3 Syslog Port
If syslog is active enter here the port number, that your Syslog server uses to receive syslog information.
More information about Syslog you can find in chapter Syslog, on http://www.gude.info/wiki or ask our support team.
5 Operation
5.1
Sensor
Connect the temperature sensor with the TEMP and AUX connector at the front of the device. If it is connected exactly, the
recent temperature is displayed in the login window, in the switching window and can be requested via SNMP.
The temperature sensor can be ordered as additional supplies. More information can be found at www.gude.info or requested
at mail@gude.info.
Temperature sensor 7001
Hybrid sensor 7002
Temperature sensor 7001
Cable length ˜ 2m
Connection PS2
Measurement -10°C bis +70°C bei ±2°C (maximal) und ±1°C (typisch)