Minimum Age
No special limits by age apply to this machine. Use is related to the body height and strength of the user.
Training
Use of the unit requires adequate lesson by a professional or the use of the manual only . Special training is not required.
Technical Data
BX 710
Input power:
230 V~50 Hz
Motor output power
810 W
Speed
0-2900 rpm.
Impact rate
0-52200 /min
Quick clamping chuck
2-13 mm
Drilling output
steel 13 mm
stone 13 mm
wood 32 mm
Cable length
3 m
Vibrations a
w
2,5 m/s
2
Acoustic pressure level LP
A
92,5 dB(A)
Acoustic power level LW
A
103,5 dB (A)
Ordering number.:
58020
Initial Operation Safety Instructions
-
Wear eye and ear protectors.
-
Before boring a hole in the wall, check the area with metal detector for electrical, water or gas lines.
-
Unplug the unit before changing the drill/chuck!.
-
The worked piece must be secured (vised, e.g.) to avoid injuries
-
Do not let the motor stop for overload in the course of drilling/screw driving.
-
Observe general safety instruction for handling electrical tools.
Operation
Switching on:
Press switch (12).
Continuous use:
Press on-off switch (12) and retain with locking button (2).
Switching off:
Pres and release on-off switch (12).
Left/right run:
to be selected with on-off switch
10).
The speed may be selected by various pressure on the switch (12) or pre-selected with the speed control (11).
Wood and Metal Drilling
Put the mode selector (13) on „Drilling“ and the Rotational Direction Switch (10) on „Right“. Select the speed with button (11).
Stone and Concrete Drilling
Put the mode selector (13) on „Impact“ and the Rotational Direction Switch (10) on „Right“. Select the speed with button (11and start
with low speed.
Driving Screws
Put the mode selector on “Drilling” and the Rotational Direction Switch (10) on „Right” for screwing up and Left for screwing out. Select
the speed with button (11) and start with low speed.
.
Operator Safety Instructions
•
Do not use the machine until you have read the instruction manual carefully.
•
Observe any safety instructions included in the manual.
•
Be responsible to the others
10
