6
Expert Power Control 1104 / 1105
© 2022 GUDE Systems GmbH
Device Description
1
Device Description
1.1
Security Advice
·
The device must be installed only by qualified personnel according to the following in-
stallation and operating instructions.
·
The manufacturer does not accept responsibility in case of improper use of the device
and particularly any use of equipment that may cause personal injury or material dam-
age.
·
The device contains no user-maintenable parts. All maintenance has to be performed
by factory trained service personnel.
·
This device contains potentially hazardous voltages and should not be opened or dis-
assembled.
·
The device can be connected only to 230V AC (50Hz or 60 Hz) power supply sockets.
·
The power cords, plugs and sockets have to be in good condition. Always connect the
device to properly grounded power sockets.
·
The device is intended for indoor use only. Do NOT install them in an area where ex-
cessive moisture or heat is present.
·
Because of safety and approval issues it is not allowed to modify the device without
our permission.
·
The device is NOT a toy. It has to be used or stored out of range of children.
·
Care about packaging material. Plastics has to be stored out of range of children.
Please recycle the packaging materials.
·
In case of further questions, about installation, operation or usage of the device, which
are not clear after reading the manual, please do not hesitate to ask our support team.
·
Please, never leave connected equipment unattended, that can cause damage.
·
Connect only electrical devices that do not have limited on-time. I.e. in case of failure,
all connected appliances have to cope with a continuous on-time without causing
damage.
1.2
Content of Delivery
The package includes:
·
Expert Power Control 1104 / 1105
·
Quick Start Guide
1.3
Description
The
Expert Power Control 1104 / 11105
can switch one different load output. The
device has the following features:
·
One Power Port switchable directly on the device, via HTTP(S), SNMP
·
Dedicated high-inrush relay avoid welding of relay contacts at start-up peaks
·
Metering of energy, current, power factor, phase angle, frequency, voltage and act-
ive/apparent/reactive power (
EPC 1105
)
Summary of Contents for Expert Power Control 1104
