GÜDE Expert PDU Energy 8340 Series, Manual

Page: 8 / 82

8
Expert PDU Energy 8340/8341 © 2021 GUDE Systems GmbH
Device Description
1. - 4. Load outputs for phases L1 to L4 (IEC C19, max. 16 A)
Rear of the device
1. - 4. Load inputs for phases L1 to L4 (IEC C20, max. 16 A)
5. Mains supply (IEC C14, max. 10 A)
Start-up the device
· Connect the power cord (IEC C14, max. 10 A) to the mains supply.
· Plug the network cable into the Ethernet socket (RJ45).
·
Insert optional external sensors into the sensor connectors.
·
Connect the mains supply with the load inputs
(IEC C20, max. 16 A), and
the con-
sumers with the load outputs (IEC C19, max. 16 A). The cable connectors are se-
cured as regards their type against unintentional loosening. They must be inserted
up to the stop, otherwise there is no secure connection. The plug must not wobble in
the socket, or there is no tight connection.
1.5 Hotswap Drawer
This PDU is "hot-swap" capable. The device has a removable drawer, on which all of
the active electronics, including the power supply, is located. In case of a fault, you can
order a replacement electronics from the manufacturer. The devices connected to the
ports are not disturbed in the exchange. Specific instructions for replacement of the
electronics drawer will be delivered with the exchange electronics. Do not open the
drawer without a compelling reason, this can lead to loss of warranty.