GÜDE Expert PDU Energy 8340 Series, Manual

Page: 45 / 82

45
Expert PDU Energy 8340/8341 © 2021 GUDE Systems GmbH
Specifications
·
Syslog messages
E-Mail messages
Email messages are triggered by the following events:
· Switching of the Ports
·
Exceeding of the max / min values of attached sensors
·
State change of digital sensor input ports
SNMP Traps
SNMP Traps are system messages that are sent via the SNMP protocol to different re-
cipients. SNMP traps are triggered by the following events:
· Switching of the Ports
· Exceeding of the max / min values of attached sensors
· State change of digital sensor input ports
Syslog messages
Syslog messages are simple text messages that are sent via UDP to a syslog server.
Under Linux, normally a syslog daemon is already running (eg. syslog-ng), for Mi-
crosoft Windows systems some freeware programs are available on the market. The
syslog messages are sent for the following events:
·
Turning on the device
·
Enable/disable of syslog in the configuration
· Switching of the Ports
· Exceeding of the max / min values of attached sensors
·
State change of digital sensor input ports
SNMP Trap Console MQTT Syslog Email
Global
Device started x x x x x
Syslog switched on/off x
MQTT connection established x x
MQTT connection lost x
Value-Threshold
external sensors
Current, differential current Type
A
x x x x x
Time-Interval
external sensors
Current, differential current type
A
x x
Value-Delta
external sensors
Current, differential current type
A
x x
SNMP traps
There are common traps for state changes of the same device resource. For example,
a SwitchEvtPort trap is sent when a port is turned on or off. The state change itself is