GÜDE 95435, Translation Of The Original Instructions

Page: 44 / 96

38 39
FR
Inspection and maintenance plan
Non-compliance with the maintenance plan may result in damage to the motor!
Regular servicing period Before
any start-
up
After 1
month
After 3
months
After 6
months
After 12
months
After 24
months
5
Hours of
operation
25
Hours of
operation
50
Hours of
operation
100
Hours of
operation
250
Hours of
operation
Engine oil
(10W-40)
Inspection 
Change  
Air filter Inspection 
Change 
Spark plug Inspection
Clean 
Change 
Carry out the appropriate maintenance in the month specified or after being operated for the number of operating hours
specified, depending on which occurs first.
Defects searching
Failures Causes Removal
The motor does not start Start-Stop lever has not been pressed Press the Start-Stop lever
Primer pump not activated Activate primer pump
Lack of fuel Add some fuel
Bowden cables are too long Adjust the Bowden cables using the
coupling nut.
Wrong fuel, storing without petrol tank
being drained
Drain the fuel tank and carburettor. Add
fresh petrol.
Sooted spark plug (carbon residues on
electrodes), electrodes distance too big
Clean the spark plug, check the plug thermal
value, possibly change the plug, set the
electrodes distance to 0.6-0.7 mm
The spark plug is wet from petrol (oversa-
turated engine).
Dry the spark plug out and refit it.
Automatic feed does
not function
Bowden cables are too long Adjust the Bowden cables using the
coupling nut.
Grass is not collected
Blocked channel
Full collection bag
Too wet grass Clean the ejection channel
Empty the collection bag
Cut in dry weather
EN
ENGLISH