Unplug the pump before doing any work on it.
The user shall be held liable for observing the local safety and assembly regulations.
If the pump is defective, only an authorised workshop should do the repair. Only genuine spare parts should be used.
If the supply cord is damaged, it must be replaced by the manufacturer, it´s service agent or similarly qualified persons in order
to avoid hazards.
2.1
Emergency Action
Leiten Sie die der Verletzung entsprechend notwendigen Erste Hilfe Maßnahmen ein und fordern Sie schnellst möglich
qualifizierte ärztliche Hilfe an. Bewahren Sie den Verletzten vor weiteren Schädigungen und stellen Sie diesen ruhig.
Für einen eventuell eintretenden Unfall sollte immer ein Verbandskasten nach DIN 13164 am Arbeitsplatz griffbereit
vorhanden sein. Dem Verbandskasten entnommenes Material ist sofort wieder aufzufüllen.
Wenn Sie Hilfe anfordern,
machen Sie folgende Angaben:
1. Ort des Unfalls
2. Art
des
Unfalls
3. Zahl
der
Verletzten
4.
Art der Verletzungen
2.2
Signs on Unit
Meaning of Symbols
Symbols shown below are used throughout this manual and/or on the unit:
Product Safety
Product compliance
with respective EU
standards
Ban, general in
combination with
another pictograph
No pulling the cable
Warning/Caution
Beware of hazardous
voltage
Unplug before opening
Read operating manual
before use
Wastes to be disposed
of in a professional
manner not to harm the
environment .
Cardboard packaging
to be collected for
recycling
Faulty and/or disposed
of electrical/electronic
appliances to be
collected by authorised
salvage places .
Protect from moisture
Fragile
Keep up
2.3
Assigned Use
The pump is designed to deliver clean water only
The manufacturer shall not be held liable for any damage if provisions arising from general regulations and this instruction
manual are not observed.
2.4
Residual Hazards and Protective Action
2.4.1
Electric Residual Hazards
Hazard Description
Protective
Action
Residual
Hazard
Direct electric contact
Electrical shock
Current protection switch FI
Use without FI
Indirect electric contact
Electrical shock via medium
Current protection switch FI
Use without FI
2.4.2 Disposal
Disposal instructions are illustrated in the form of pictograms on the device or packaging. Description of the pictograms is given
in "Identification" chapter.
Disposal of transport packaging
Packaging protects the device against damage during transport. Packaging materials are usually selected according to their
effect on environment and disposal methods and can therefore be recycled.
11
