Minimum age
The machine can only be operated by persons over 16
years of age. An exception includes youngsters operating
the machine within their professional education to achieve
necessary skills under trainer's supervision.
Training
Using the machine only requires appropriate instructions
by a professional or reading the Operating Instructions.
No special training necessary.
Maintenance
Do you have any
technical questions?
A claim?
Do you
need spare parts or the Operating Instructions?
You will be helped quickly and without needless
bureaucracy at our webpage
www.guede.com
in the
Services
section. Please help us be able to assist you. To
identify your machine when claimed, we need to know its
serial No., order No, and year of production. All these
details can be found on the type label. Enter the details
below for future reference.
Serial No.
Order No.
Year of production:
Tel.
+49 (0) 79 04 / 700-360
Fax:
+49 (0) 79 04 / 700-51999
Email:
Servicing and keeping
Switch the machine off and unplug it before any
servicing and cleaning.
Keep the ventilation slot and body without any dust and
dirt.
To clean the machine, use a smooth and fine soap water
solution. Prevent any direct contact of aggressive cleaning
agents with the machine. No aggressive, volatile or caustic
cleaning agents may be used.
Once a year, have the electric garden shredder checked
by a qualified authorised professional.
The machine needs to be protected against moisture and
dust.
If the machine is used for a longer time, keep it covered in
a dry, safe place inaccessible to children.
Changing the knife (pic. G)
Wear safety gloves when changing the knife!
Open the cover and loosen the knife (pic. G).
A rotating knife is inbuilt in your garden shredder.
Therefore, you must just turn the knife and tighten it using
the Allen key when replacing the knife for the first time.
Close the cover again after turning/changing both knives.
Troubleshooting
The table shows possible failures, their causes and
remedy options. If the problem still cannot be removed,
contact a professional to help you.
Switch the machine off and unplug it before any
servicing and cleaning.
Risk of electric shock.
Symptom
Possible cause
Remedy
Collection box not
fitted properly
Install the collection box
properly
Feeding hopper not
fitted properly
Install the feeding
hopper properly
Defective outlet
Use another outlet
Extension cable is
damaged
Check or replace the
cable
Fuse has been
activated
Change the fuse
Machine
not running
Overload protection
has been activated
Press the overload
protection button (pic.
A/8) and remove the
blocking as specified in
“Operation”
Shredded material
is wet and soft
To insert the shredded
material in the machine,
use the sliding part
Shredded
material
not pulled
in
Shredded material
has got jammed in
the machine
Remove the blocked
shredded material
(safety gloves to be
worn at all times)
13
Summary of Contents for 94060
