GÜDE 39004, Translation Of The Original Instructions

Page: 18 / 64

18
4) Power tool use and care
a)
Do not force the power tool. Use the correct power
tool for your application.
The correct power tool will
do the job better and safer at the rate for which it was
designed.
b)
Do not use the power tool if the switch does not turn
it on and off.
Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
c)
Disconnect the plug from the power source and/or the
battery pack from the power tool before making any
adjustments, changing accessories, or storing power
tools.
Such preventive safety measures reduce the risk of
starting the power tool accidentally.
d)
Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool
or these instructions to operate the power tool.
Pow-
er tools are dangerous in the hands of untrained users.
e)
Treat electric tools carefully. Check whether the mo-
ving parts work perfectly and do not drag, whether
not broken or damaged to such an extent that func-
tioning of electric tools could be affected. Have any
damaged parts repaired before using the machine.
Many accidents are caused by poorly maintained power
tools.
f)
Keep cutting tools sharp and clean.
Properly maintai-
ned cutting tools with sharp cutting edges are less likely
to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in ac-
cordance with these instructions, taking into account
the working conditions and the work to be performed.
Use of the power tool for operations different from those
intended could result in a hazardous situation.
5) Service
a) Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
Additional Safety and Working
Instructions
Do not use the device near flammable liquids or gases. Risk
of fire and explosion in case of short circuit.
Cable connections to be separated by pulling the plug only.
Pulling the cable could damage both the cable and plug. As
a result, electric safety would no longer be guaranteed.
ENGLISH
EN
EN