-5-
BEFORE FIRST USE
Before using the E-Scooter for the first time, it is recommended to check if the battery is completely
charged. We recommend you to fully charge the battery before first use and read this manual
thoroughly.
Always verify if the E-Scooter has any damage before using it: check if the steering system is correctly
adjusted, that all connected elements are correctly tightened and that the brakes and tires are in
good condition. Damages could lead to incorrect usage or defects that can cause accidents.
ASSEMBLING
The E-Scooter is folded when placed in the box.
•
To unfold the E-Scooter, pull out the folding handle (5) to release and put the front bar up until
it clicks into place. Close the folding handle (5).
•
Attach both handles. Please attach the handle marked L on the left side, and the handle marked
R on the right side.
Note
: You have to turn 1 handle clockwise, and the other handle counterclockwise to fix /
loosen it.
•
To fold the E-scooter again for easy storage, release the folding handle (5), and gently pull the
front bar down. Close the folding handle (5).
CHARGING
•
Power off the vehicle when charging.
•
Only charge the vehicle when it is located indoors.
•
Put one side of the charging adapter cable into the charging port (6) of the E-Scooter.
•
Place the other side of the charging adapter cable in a power outlet.
•
During charging, the indicator light of the charger is red. The indicator light turns green when
the battery is fully charged.
