7
8
UserManual_Page 1_v5_04.25.14_actual size.indd 5
4/25/2014 4:29:38 PM
Trouble Shooting
Issue
Solution
Cause
Check that sensor has working
batteries that are installed
properly and receiver is
plugged in or has batteries and
is turned
"On"
Make sure volume wheel is
turned up (turn towards 12V
port for max volume)
Follow instruction in section
C, "Pairing your Sensors with
a Receiver"
Reset all sensor dip switches to
factory settings (see
section F
)
Sensor and/or receiver not
powered on
Volume not turned up
Sensor not paired with
receiver
Incorrect sensor settings
No alarms?
Reset all zones on your
receiver and re-pair your
sensor(s). See the "Helpful
Tips" section for reset
instructions.
Move sensor to new location
at least 5 feet from metal
gates, poles or structures.
Don't use receiver in building
with metal siding or stucco.
Move sensor closer to your
receiver and/or remove any
physical objects between
sensor and receiver. If using
in a heavily wooded area, your
effective range will be
Reset all sensor dip switches to
factory settings (see
section F
)
Replace your sensor batteries
and re-pair your sensor to your
receiver. See section "C" for
re-pairing
Sensor not paired properly
Signal Interference
End of functional range
Incorrect sensor settings
Low Batteries
Inconsistent alarms?
Move sensor and/or receiver
away from electrical
transformers or other cause of
interference
Take sensor inside, remove
backplate and let air dry for 24
hours. Ensure back plate is
securely screwed on and keep
protected from the elements
when re-installing
Sensor or Receiver are
receiving electrical
interference
Moisture inside sensor
False alarms?
Can't change
melody/wrong
melody?
Issue
Solution
Cause
Sensor paired with different
melody
Must follow steps in section C,
"Pairing your Sensors with a
Receiver" to change your
melody