B. Powering your Receiver and Sensor
Adapter Plug
Receiver
Zone #
Indicators
Low Sensor
Battery LED
1
2
2. Replace the cover
and secure the four
screws.
AA
AA
AA
AA
UserManual_Page 1_v5_04.25.14_actual size.indd 2
4/25/2014 4:29:37 PM
Thank you for purchasing a Guardline Driveway Alarm! This
driveway alarm has a quarter mile range and is great for multiple
applications, including: alerting you when visitors enter your
driveway, deterring trespassers and thieves from entering your
property or building, alerting you to wildlife on your land, for use in
drive-through’s to signal that a customer pulled in, and more!
If you have questions about your Guardline, our Seattle-based
customer service is available Mon-Fri, from 7am to 3pm Pacific
Time at (888) 519-0413 or online at www.GuardlineSecurity.com
Sincerely,
The Guardline team
A. An Overview of your Guardline Driveway Alarm
1. Remove the screws from the four
corners of the sensor to access the battery
compartment.
BE CAREFUL
! The
screws are very small, don’t lose them.
Install four (4) AA batteries as indicated.
The sensor runs on four (4) AA batteries (not included) and operates wirelessly
at a maximum distance of a quarter mile (1,300 feet) from the receiver.
Sensor
AA
AA
AA
AA
AA
AA
AA
AA
Receiver
The main power source for the receiver is the included 12v/500mA AC/DC
power adapter. Simply plug the adapter into a wall outlet, then into the side of
your receiver, near Zone 1.
Alternatively, you can power the receiver with four
(4) AAA batteries. Just slide off the back cover of
the receiver in the direction of the arrow on the
cover (it should slide up towards Zone 1), then
install the batteries as shown.
Receiver power
indicator LED
Receiver
Sensor
Your Guardline receiver will
flash on the corresponding zone
and chime whenever one of your
paired sensors is activated.
You can pair up to 16 sensors to
your receiver (4 per zone)
allowing you to receive alerts for
a near-unlimited number of areas.
Sensor “eye”
Sun shade