Guardian Wireless Pet Containment System, Operating And Training Manual

Page: 7 / 44

www.guardianpet.net 7
Transmitter
Range Chart
Boundary
Control
Dial
Position
Boundary
Switch
LOW
Boundary
Switch
HIGH
1 5-10 ft 5-10 ft
2
5-10 ft 5-10 ft
3 15-20 ft 25-35 ft
4 20-25 ft 42-55 ft
5 25-30 ft 55-65 ft
6
35-40 ft 75-85 ft
7 40-45 ft 85-90 ft
8 40-45 ft 85-90 ft
Note: These distances are approximate.
Record Your Settings
Final Boundary
Switch Setting
(HIGH or LOW) Final Boundary
Control Dial
Position (1-8) Receiver
Static
Correction
Level (1-6)
Home
Camping
Vacation
Other
One-Person Method
Measure the shortest distance from
the desired Boundary Zone to the
Transmitter. Find the distance on
the Transmitter Range Chart below
and set the Boundary Switch and
Boundary Control Dial. Take the
Receiver Collar to the Boundary Zone
with the Receiver Collar at your pet’s
neck height (
3B ) with logo side facing
away from the Transmitter ( 3C ).
Determine where the Receiver Collar
begins to beep. If the Receiver Collar beeps before or after the desired Boundary Zone, return to the Transmitter
and adjust the Boundary Control Dial. Repeat this process until the Receiver Collar is beeping at the desired
location. Record your settings below for future reference.
Note: If you cannot hear the beep, refer to the “Test Light Instructions” section.
3D
Boundary
Zone
Pet
Area
3B 3C
Place the Boundary Flags
The Boundary Flags are visual reminders for your pet of where
the Boundary Zone is located. The Receiver Collar will activate
within 2 to 3 feet of the Boundary Flags.
1. Hold the Receiver Collar at your pet’s neck height with logo
side facing away from the Transmitter.
2. Walk towards the Boundary Zone until the Receiver Collar
beeps ( 4A ).
3. Place a Boundary Flag in the ground ( 4B ).
4. Walk back into the Pet Area until the beeping stops.
5. Repeat this process around the Boundary Zone until it is
marked with Boundary Flags every 10 feet.
The Boundary Flags may be in different parts of the Boundary
Zone and may not be in a line. The Boundary Zone is 2 to 3 feet wide.
Note: If you cannot hear the beep, refer to the “Test Light Instructions” section.
4A
H
A P P Y O W N E R S
S A F E P E T S
4B
Step
4