Page 32
GUARDIAN SCC-40
Issue (Auto VI) & V3.6t 07/12/00
SETTINGS CHANGE PUSHBUTTON OPERATION
“next”
‘next’ is used to initiate
'settings change'
operation provided an external security
key or ink is activated or the appropriate passcode has been entered.
(See configure unit model section)
Passcode entries remain valid for 30 minutes.
Subsequent pressing of the
'next'
pushbutton cycles through the seven display
windows flashing the last digit of each in turn to indicate which window is
selected for changes. Unused windows are skipped.
Different settings may be displayed using
'view'
and
'type'
selections.
Changes are made by using the
'raise'
and
'lower'
pushbuttons to alter the
displayed setting which then must be followed by pressing the 'accept'
pushbutton.
“Accept”
'accept' pushbutton enters new values of setpoints, timers, alarm or trip settings.
“raise”
If the 'raise' pushbutton is held on for more than 2 seconds then the value
increases automatically at a higher rate.
“Lower”
If the 'lower' pushbutton is held on for more than 2 seconds then the value
decreases automatically at a higher rate.
If an attempt is made to change a setting using the incorrect passcode then the
display defaults to:-
'view'
= LATEST VALUE
'type'
= PRESSURE
“RESET”
Exits setup mode without clearing passcode pressing ‘next’ again will flash value
to be changed.
Summary of Contents for SCC 25
