10-3 Rev. A
2018-11-7
Basic Functions
Feature
Description
Carbon Monoxide (CO)
detection
The system generates an alarm when the CO level rises above 50 parts per
million (PPM) and stays above this level for 3 min 30 seconds. The alarm
operates without any delay in case the CO level rises above 400 PPM. Data
is transmitted via an RS 232 port and a remote warning light is switched on
in case of CO crossing threshold levels.
CO warning light
This light will be switched on when the CO level is detected above the
designated threshold.
Cabin altitude warning
light
This warning light will alert the pilot at preset cabin altitudes of 10,000
feet, 12500 feet and 14,000 feet AMSL.
Tone generator
FMS 65X and 85X generates a tone and sends it to the aircraft audio
panel whenever an alarm condition exists.
Data transfer
FMS 65X and 85X unit interfaces with the RS 232 data bus and is able to
access a large number of aircraft parameters. This data can be transferred
via a Bluetooth connection (Not current available) to as many as six iOS
devices simultaneously. These devices include iPhones and iPads.
Real time instrument
data accessibility via
Bluetooth
Data transferred via Bluetooth (Not current available) can be viewed in real
time over iPhones or iPads inside the aircraft.
Remote reset
The unit can be reset remotely either by a hard wire reset or via the RS232
data stream.
USB Power
The unit has two USB ports. These can provide 2.5 Amp power each to two
smart USB devices. In case the unit is connected to a non-smart switch, it
will be able to provide 1 Ampere continuous power supply.
Summary of Contents for FMS 65 Series
