E-3
E-5
E-4
iNSTALLATioN
Features: The filter is an all-in-one multi-stage filter.
layers of air cleaning include:
1. Charcoal removes odors and smoke.
2. hEPA captures 99.97% of airborne dust and allergens.
3. PCO captures and dissolves airborne allergens and mold.
4. UV-light bulb works with filter to kill germs.
Cleaning the unit
WARNiNG: To avoid serious injury from electric shock, the
unit must be turned oFF and unplugged from the power outlet
prior to any cleaning.
1. TUrN ThE UNIT OFF AND UNPlUg ThE UNIT FrOM ThE
POWEr OUTlET.
2. Clean unit with a soft, damp cloth only. DO NOT pour or splash
water on the unit or use any abrasive type cleaner. Clean all
external surfaces, especially the air intake grills and air outlet.
3. reposition the unit, plug power cord into power outlet
and turn ON.
PRoBLEM
SoLuTioN
Unit doesn't operate.
Check that unit is plugged in.
Check Safety Switch: remove filter. Check
small metal safety switch. Switch cannot be
bent inside the unit.
Call Customer Service at 1.866.603.5900.
No air circulating from unit.
Unplug unit: Check filter and
remove bag before first use.
Increase in noise level.
Make sure filter is clean.
replace. Unplug unit: Open
bottom, remove filters and
make sure fan is clear.
Filter door does not
close properly.
Check that the installation of the
filter is correct.
TRouBLEShooTiNG GuidE
Safety
Switch
iNSTALLATioN
The filter can be found packaged inside the Air Purifier. It is recommended
to replace the filter every six months to maintain optimal performance.
Replacement filter model number is Filter (FLT4010).
installing the Filter
1. Unplug the air purifier from the electrical outlet.
2. lift to release the filter cover.
3. gently pull filter from unit (*and
remove bag from the filter if the
unit is new).
4. replace filter into compartment.
Make sure the dark gray side
faces up towards you.
5. To install new filter reverse steps 1-4.
do NoT insert filter with
white pleated side facing up.
Dark gray side should
always face upwards.
