3
Compatibility
When making connections with the device,
eliminate all possibility of roll-out. Roll-out occurs
when interference between a connector and the
attachment point causes the connector gate to
unintentionally open and release. All connections
must be selected and deemed compatible with
this device by a CP. All connector gates must
be self-closing, self-locking, and withstand
minimum loads of 3,600 lbs.
See Diagram A on page 8
Maintenance, Cleaning,
and Storage
Maintenance and cleaning after use is important
for maintaining the safety and longevity of
the device. Remove all dirt, corrosives, and
contaminants from lanyard before and after
each use. If device cannot be cleaned with plain
water (not exceeding 30°C), use webbing/rope
detergent and plain water, then rinse and ensure
webbing is left to dry naturally out of direct
sunlight and away from direct heat sources,
never store equipment if it is wet. NEVER clean
device with corrosive substances. When not in
use or during transport, store equipment where
it will not be affected by heat, light, excessive
moisture, chemicals, or other degrading
elements.
Exclusions
Guardian holds global product liability cover
for your safety. However, Guardian will NOT be
responsible for:
Users who are out of the scope of any
written manuals or training given.
Any PFAS or components that have
NOT been inspected under the current
applicable legislation, including
regional specific legislation.
Operators who do not use fall
arrest equipment where required as
determined by risk assessment.
Devices that have been damaged.
The max weight being exceeded.
Devices that have NO serial number
markings, and the manufacturer’s
name
Guardian
not present.
Potential mis-use, including
but not limited to:
Non-industrial use
Connection and/or use of
incompatible equipment
Adapting/modifying the
device in any manner
Using the device in environments which
may degrade or affect the performance
of the device such as those listed in the
user information (e.g. in close proximity
of heat, chemical, electrical hazards)
Use on surfaces outside of the
scope given by the manufacturer
Re-using the device after it has
been subjected fall forces
Using a device that has not met the
storage, transportation, maintenance
and inspection requirements.
Quality
All Guardian products are manufactured under
ISO 9001:2015
and to the highest standards.
Summary of Contents for 36100
Page 11: ...11...
