G
ua
rd
ia
n
Fa
ll
Pr
ot
ec
tio
n
6
30
5
S.
2
31
st
S
t.
, K
en
t,
W
A
9
80
32
p
ho
ne
: (
80
0)
4
66
-6
38
5
f
ax
: (
80
0)
6
70
-7
89
2
w
w
w
.g
ua
rd
ia
nf
al
l.c
om
11
85332 (Rev. C)
Labels
Harnesses and connectors selected must be compliant with manufacturer’s instructions, and must be of
compatible size and configuration. Snap hooks, carabiners, and other connectors must be selected and applied
in a compatible fashion. All risk of disengagement must be eliminated. All snap hooks and carabiners must be
self-locking and self-closing, and must never be connected to each other.
A pre-planned rescue procedure in the case of a fall is required. The rescue plan must be project-specific. The
rescue plan must allow for employees to rescue themselves, or provide an alternative means for their prompt
rescue. Store rescue equipment in an easily accessible and clearly marked area.
Training of Authorized Persons to correctly erect, disassemble, inspect, maintain, store, and use equipment
must be provided by a Competent Person. Training must include the ability to recognize fall hazards, minimize
the likelihood of fall hazards, and the correct use of personal fall arrest systems.
NEVER use fall protection equipment of any kind to hang, lift, support, or hoist tools or equipment, unless
explicitly certified for such use.
Equipment subjected to forces of fall arrest must immediately be removed from use.
Age, fitness, and health conditions can seriously affect the worker should a fall occur. Consult a doctor if there
is any reason to doubt a user’s ability to withstand and safely absorb fall arrest forces or perform set-up of
equipment. Pregnant women and minors must not use this equipment.
Physical harm may still occur even if fall safety equipment functions correctly. Sustained post-fall suspension
may result in serious injury or death. Use trauma relief straps to reduce the effects of suspension trauma.
Compliant with
OSHA 1926 Subpart M
and OSHA 1910
Part #: 15206
Date of Manufacture:
SPECIFICATIONS
Material:
316 Stainless Steel
Peak Dynamic Pullout Load:
2,500 lbs.
Average Dynamic Pullout Load:
2,000 lbs.
Ultimate Strength:
5,000 lbs.
THIS HLL ENERGY ABSORBER IS ONLY TO
BE USED AS PART OF A COMPLETE FALL
ARREST SYSTEM. AT NO POINT IS THIS TO BE
USED AS A PERSONAL ENERGY ABSORBER.
THIS PRODUCT MUST BE USED WITH
AN APPROVED HORIZONTAL LIFELINE OR
INSTALLED AND DESIGNED UNDER THE
SUPERVISION OF A QUALIFIED PERSON
WITH A SAFETY FACTOR OF AT LEAST TWO.
READ AND FULLY UNDERSTAND THE
MANUFACTURER’S INSTRUCTIONS SUPPLIED
WITH THIS EQUIPMENT. FAILING TO DO SO
MAY RESULT IN SERIOUS INJURY OR DEATH!
SHARP EDGES WHEN DEVICE IS DEPLOYED!
Metal Energy
Ab
sorber
(800) 466.6385 phone
www.guardianfall.com
Assembled in USA
Patent Pending
90868 (Rev. B)
6305 S 231st Street
Kent, WA 98032
